BPLPR - MX214, DIAMOND OR CUBIC BORON NITRIDE GRIND
- MSDS: BPLPR
- Manufacturer: NORTON CO
- Product Name: MX214, DIAMOND OR CUBIC BORON NITRIDE GRIND
- National Stock Number: 5130-00N031740
Product Identification
Product ID:MX214, DIAMOND OR CUBIC BORON NITRIDE GRIND
MSDS Date:06/18/1986
FSC:5130
NIIN:00N031740
MSDS Number: BPLPR
Responsible Party
WORCESTER, MA 01606-2698
US
Emergency Phone: 617-795-2690
Info Phone: 617-795-2690
Cage: 44197
Contractor
Telephone: 508-795-2690/508-795-5000
Cage: 44197
Ingredients
COBALT (SARA III)
CAS: 7440-48-4
RTECS: GF8750000
Fraction By Weight: 65%
OSHA PEL 0.1 MG/M3;AS CO
ACGIH TLV: 0.05 MG/M3;DUST 9293
CHROMIUM, ION (CR 3+); (CHROMIUM SALTS) (TRIVALENT)
CAS: 16065-83-1
RTECS: GB6261000
OSHA PEL 0.5 MG/M3
ACGIH TLV: 0.05 MG/M3
COPPER (SARA III)
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: 30%
OSHA PEL 0.1MG/M3 FUME;1 DUST
ACGIH TLV: 0.2MG/M3 FUME;1 DUST
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TIN
CAS: 7440-31-5
RTECS: XP7320000
Fraction By Weight: 25%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3
CARBON; (GRAPHITE) (LIMITS GIVEN AS GRAPHITE)
CAS: 7440-44-0
RTECS: FF5250100
Fraction By Weight: 25%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 2 MG/M3 TDUST; 9293
CALCIUM OXIDE; (LIME)
CAS: 1305-78-8
RTECS: EW3100000
Fraction By Weight: 5%
OSHA PEL 5 MG/M3
ACGIH TLV: 2 MG/M3
SILICON CARBIDE; (CRYSTOLON)
CAS: 409-21-2
RTECS: VW0450000
Fraction By Weight: 20%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
SILVER (SARA III)
CAS: 7440-22-4
RTECS: VW3500000
Fraction By Weight: 15%
OSHA PEL 0.01 MG/M3
ACGIH TLV: 0.1 MG/M3
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
FLUORIDES (AS F, CAS # NOT LISTED)
Fraction By Weight: 10%
OSHA PEL 2.5 MG/M3 (AS F)
ACGIH TLV: 2.5 MG/M3 (AS F)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:ACUTE:COUGHING, SHORTNESS OF
BREATH DURING GRINDING. CHRONIC:MAY AFFECT BREATHING CAPACITY.
INGEST:NO KNOWN ADVERSE EFFECTS, BUT INGESTION IS NOT RECOMMENDED.
SKIN:DURING GRINDING SOME MAY EXPER IENCE SKIN IRRITATION FROM
DUST. EYE:DURING GRINDING DUSTS MAY IRRITATE EYES. OTHER POTENTIAL
HEALTH (EFTS OF OVEREXPOS)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:RISKS:GRINDING MAY CREATE ELEVATED
SOUND LEVELS WHICH MAY AFFECT HEARING.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. USE ARTIFICIAL RESPIRATION AS
NEEDED. OBTAIN MEDICAL ASSISTANCE. INGEST:OBTAIN MEDICAL
ASSISTANCE. SKIN:WASH AFFECTED AREAS WITH SOAP AND WATER. OBTAIN
MEDICAL ASSISTANCE. E YES:WASH WITH LARGE AMOUNTS OF WATER FOR AT
LEAST 15 MINUTES. OBTAIN MEDICAL ASSISTANCE, IF NEEDED.
Fire Fighting
Extinguishing Media:USE WATER.
Fire Fighting Procedures:NONE. USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:USE NORMAL CLEANUP PROCEDURES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:SEE ANSI STANDARD B7.1.
Other Precautions:HANDLE WITH ADEQUATE VENTILATION. SEE OSHA
29CFR1910.94 (VENTILATION) AND 29CFR1910.1000 (AIR CONTAMINATES).
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR AS NEEDED.
FOR APPROVED DUST RESPIRATORS SEE OSHA 29CFR1910.134.
Ventilation:LOCAL EXHAUST OR MECHANICAL (GENERAL) VENTILATION ARE
RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS NEEDED HEARING PROTECTION. SEE OSHA
29CFR1910.215 (HEARING PROTECTION).
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO:WHEELS BOND TYPE. DECOMP PROD:SIGNIFICANTLY
GREATER THAN THE GRINDING WHEEL COMPONENTS. COOLANTS MAY PRODUCE
OTHER DECOMPOSITION PRODUCTS.
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:>428F,>220C
Spec Gravity:2-4
Solubility in Water:SLIGHT
Appearance and Odor:SOLID PRODUCT. MAY GIVE OFF ODOR IN USE.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:IN USE, DUST & DECOMP ORGANIC FUMES
ARE GENERATED. IN MOST CASES, MATL REMOVED FROM WORKPIECE WILL BE
(SUPDAT)
Disposal
Waste Disposal Methods:STANDARD LANDFILL METHODS CONSISTENT WITH
APPLICABLE FEDERAL, STATE AND LOCAL LAWS. PRODUCTS WITH LISTED
FLUORIDES MAY HAVE SLIGHTLY SOLUBLE FLUORIDE SWARF.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.